RECORDING THE WORLD...ONE PIXEL AT A TIME!
Home
About us
Products & Services
ARDIS Sensor
Site map

ARDIS

Our R&D department has developed ARDIS II (Advanced Resolution Digital Imaging System) with our clients’ needs in mind. ARDIS II was designed to collect very high resolution images at a rapid speed. In addition, the ARDIS II can be easily merged with most LiDAR systems for dual sensor collection.

Thanks to ARDIS II and its accompanying software suite, turn around times of less than a week from the data collection to the finished product are possible. 

Automation can be achieved to either start collection at specified flight lines, or to accept trigger pulses from third-party systems. ARDIS has on-board data storage enabling up to 600 GB of data.

The ARDIS system 

The ARDIS Sensor
System Platform Requirements
Focal Length 50mm Mount works without a gyro-stabilized mount (can be provided on request)
Pixel Size 6.7 micron Voltage Supply 28 VDC
Maximum Aperture f1.8
Pixeldepth 8 bit recommended (12 bit capability) GPS Antenna BNC connector, 50 ohms (must be supplied by aircraftactive or passive)
IMU Accuracy 0.002 degrees (pitch and roll), 0.005 degrees (yaw) Physical Dimensions
GPS Accuracy 0.5 meter position Size 350mm x 110mm x 220mmm
Data Capacity 600 GB Weight 25 Kg max
Collection Rate 24 MB / sec Operation
Altitude Range 300 meters - 2000 meters
Sensor Performance Minimum Aircraft Speed none
Image Frame Size 7020 x 1030 per color Post Processing
Image Type RGB Processed formats Customer defined
Image Format RAW
Ancillary Data attitude, position, time
Stabilization Type electronic
FMC
Motion blur none @ 200 knots
IMU Drift

Global Imaging Technologies
 10820 Beaver Dam Road
Hunt Valley, MD 21030

Phone:
1-443-415-4609

info@globalimagingtech.com